Generally, a new car is painted with a total of 4 layers of paint:
1、電泳漆層:這里要提一下在電泳漆層之前有一個工序是對鈑金磷化的,首要是在鈑金外表構成一層不溶于水的磷化膜,維護鈑金金屬,提高防腐蝕才能。電泳漆層涂裝是將整個車身悉數泡到電泳池里面,無死角翻滾侵泡,首要效果是防銹、防銹、是車身防銹的底層。
電泳漆層
2、中涂底漆層:其實電泳漆層過后并不是直接上中涂底漆,我們知道整個轎車,簡單受到腐蝕的一定是底盤,并且是嚴重,所以轎車底盤會再上一層反腐漆,雙重維護,即“底盤裝甲”。之后中涂底漆層,首要起填充效果,填充一些凹陷和小瑕疵,作為色漆層與電泳漆層隔離層,可以提高色漆層的裝飾性。當然肯定也有防腐效果的,
轎車油漆涂裝
3、色漆層:這一層便是轎車油漆色彩的展現,有素色漆、金屬漆(含金屬顆粒的漆)。
4、清漆層:維護色漆層,增加光亮度。耐紫外線、耐候性強。
以上是歸于轎車原廠漆涂裝漆層。除了色漆層不需求烘烤,其他三個漆層需求烘烤,人們把這種涂裝工藝叫做“四涂三烤”,烘烤溫度需求到達170℃以上。傳聞現在有轎車廠商選用“三涂二烤”,去掉了中涂底漆層,這種轎車涂裝工藝將大大環保和節能。
轎車油漆修補涂裝一般是這5層油漆,僅僅運用的資料不同。分別為:環氧底漆層,原子灰層、(中涂底漆層)、色漆層、清漆層,為什么我中途底漆層要打上括號呢,便是由于有些不正規的為了節約成本會換成紅灰,乃至省掉掉。因而轎車油漆修補,廉價沒好貨(活)。好活不廉價。
文章來源:清遠汽車修補漆 http://www.jinliangxincai.com/
08-25
Common problems with automotive repair paint
Why are the orange lines on the surface of the varnish so heavy after each spray? Why on earth? How can we prevent a decrease?Answer: The thinness of the varnish, the amount of paint produced by the s
06-05
The car repair paint manufacturer told you about the problem with water-based coatings
1. How long does it take for a skilled paint coating technician to master the operation of water paint?Generally, practice and understanding with less than half a sound can be mastered, and proficienc
05-31
Qingyuan Automobile Repair Paint Company tells you the steps for painting
Automotive Painting Process(1) Rust prevention and internal painting of the vehicle body: Depending on the condition of the vehicle body, it will be completed by a sheet metal worker.(2) Polishing and
05-12
Why does car repair paint lack luster?
If there is a lack of gloss on the surface of the originally flat and smooth car paint surface, especially during the process of car paint care, it can be observed under a microscope that the surface