2022-05-21 1045
During the process of repairing car paint, there is sometimes a phenomenon where the paint film is dull and shiny, but after monotony, the gloss may gradually fade. What is the common cause of this ph
2021-02-21 881
During the process of car paint spraying, some operational reasons can lead to the appearance of bead holes on the car paint surface. The main reasons for these phenomena are as follows:1、 The surface
2021-01-23 740
The phenomenon of car paint falling mainly refers to the loss of adhesion to the substrate due to paint cracking after the car is sprayed, and the phenomenon of small or large area detachment of the c
2020-12-25 731
It is necessary to clean and degrease the car before repairing the paint. After all, when a car is being repaired in a repair shop, the process involves evaluating the vehicle's damage, followed
2020-09-05 685
1、 Reason: The air trapped under the paint film expands, causing the paint film to separate from the substrate.a. Improper application methods for atomic ash, eye filling ash, or primer, resulting in
2020-08-04 723
As a means of transportation, the number of cars held is increasing. With the development of the times, the colors of cars are becoming more and more diverse, no longer just black and white. There is
2020-07-13 679
Why do cars need to be painted? Will the painting process be very troublesome, and will it take a long time... Do you have any understanding of the issues? Below are the relevant materials that the ed
2020-04-02 765
Many car owners overlook the maintenance of car paint, thinking that the newly purchased car paint is very new and does not need maintenance. In fact, this concept is wrong. After the car is first pur
2020-03-18 720
As soon as a car lands on the ground, it will come into contact with the ground. When you are traveling on the road, there will inevitably be some unexpected scratches. As long as there is a slight sc
2020-02-25 1178
How to repair the paintwork interface of a car so that it is not obvious? Share the operation method with us!1. Use a polishing machine to polish the entire bottom panel (do not use 2000 sandpaper for